View all articles
Setup Guides
6 min read
2026-09-14
Misc menu with hotkeys, stream-proof toggle, and Cloud DMA connected status

Enable TPM and Secure Boot on Windows for Battlefield 6

How to check TPM 2.0 and Secure Boot in Windows, turn them on in BIOS, and confirm the settings the cheat catalog expects.

Both Battlefield 6 and the ZADEYO catalog list HVCI, Core Isolation, TPM, and Secure Boot as required on Windows 10 and 11. If one setting is off, you may fail at install time, not in the game menu.

Check TPM in Windows

  • Press Windows + R, type tpm.msc, press Enter.
  • Status should show the TPM is ready.
  • Specification version should read 2.0.
  • If Windows says no TPM is found, enable Intel PTT or AMD fTPM in BIOS.

Check Secure Boot

  • Press Windows + R, type msinfo32, press Enter.
  • Secure Boot State should say On.
  • BIOS Mode should say UEFI, not Legacy.

Turn both on in firmware

Restart and open BIOS with Delete or F2. Enable firmware TPM under Security or CPU options, then enable Secure Boot under Boot. Save and reboot. Names differ by board manufacturer, so use your manual if labels do not match exactly.

Confirm HVCI and Core Isolation

In Windows Security, open Device security and Core isolation. Memory integrity (HVCI) and Core Isolation should stay on. These match the catalog requirements on the cheat product page. Pre-purchase questions live on the FAQ page.

Before you install Cloud DMA

Hyper-V needs CPU virtualization in BIOS as well. If you plan to use Cloud DMA, read the setup article so you know the order: Windows checks first, then the Hyper-V installer.

FAQ

Questions about this page

Answers for this page. The FAQ page holds the rest.